McLaren release 2

<<< Date 05.08.2022 >>>

Version of the software: 2022.8.5.734

New added function “Flash Reprogramming” for all customers with an active subscription only need purchase additional Re-flash Box J2534 device priced at 100 euro*

Finally the wait is over!!! As we promised from the beginning when we launched our tool that the team continuously worked to develop the software to make it better and to cater to all our clients demands and make you happy.

The wait is over!!! Now we are proud to announce that we are finally launching the "Reprogramming/Re-flashing" option in our tool.

This is a function that can detect available software updates for all your electronic control units. You now have the chance to update your ECU's available at your fingertips. The system will auto detect the correct software version update of the ECU no matter which market you are in, the process will guide you from start up to the end so no need to worry we got your back.

The new software data is from manufacturer's approved files.

Software release most of time comes with glitches and bugs that can affect the system of a car and can create fake errors which are most of the time disappointing. The manufacturer as we all know continues to develop for upgrades and to fix these bugs. From time to time they release software updates and now we can benefit on these upgrades as it is available on our tool. SW update is useful in fixing problems with the unit's software, for fitting a new unit when controllers are exchanged within the vehicle or when you just want to keep your vehicle up-to-date.

For all clients needing an update please contact us for support.

All supported models so far can reflash these modules: ECU, BC, CRCM, DML, DMR, HVAC, SBC, TPMS, EPHS, EPB, SAS, PCCU, TCU, PDC

*Reflash Box J2534 device is required in addition to Simplediag interface

<<< Date 03.06.2022 >>>

Version of the software: 2022.6.2.1208

For Model P1:

Body Control Module (BCM):
- Parking Sensor Diagnostic Activation
Door Module Left (DML):
- Window Calibration
Door Module Right (DMR):
- Window Calibration
Electronic Parking Brake (EPB):
- EPB Caliper Open
- EPB Caliper Closed
- G-Sensor Calibration
- Assembly Check
- Factory Customer Mode Configuration
Instrument Cluster (IC):
- Set configuration defaults
Electronic Stability Program (ESP):
- 2 Wheel Dynamometer Activation
- Yaw Rate Sensor Calibration
- Brake Bleed Routine
Heating Ventilation Air Conditioning (HVAC):
- HVAC Sensor Electrical Test
Occupant Restraints Controller (ORC):
- Configure Occupant Classification System

<<< Date 13.04.2022 >>>

For Model P1:

Engine Control Unit (ECU):
- Un-pair immobilizer
- Secondary Air Diagnosis
- Clear Misfire adaptations
- Start throttle adaption
- Save throttle adaption
- DMTL Diagnostic Module Tank Leakage Test

Motor Control Unit (MCU):
- HDA Clutch Operation

<<< Date 16.03.2022 >>>

For Model P1:

Chassis Control Unit (CCU):
- Front Active Aero Calibration
- Wheel Alignment and suspension check
- Vehicle lift control

<<< Date 07.02.2022 >>>

For Model P1:

Chassis Control Unit (CCU):

- Suspension Pressure Sensor Calibration

<<< Date 25.01.2022 >>>

For Model P1:

Chassis Control Unit (CCU):

- Suspension Calibration

<<< Date21.01.2022 >>>

For Model 12C:

Electronic Parking Brake (EPB):

- Assembly Check

- Factory Customer Mode Configuration

<<< Date 18.01.2022 >>>

For Model P1:

Chassis Control Unit (CCU):

- Electric water pump test
- Accelerometer Sensor Calibration

For Model 12C:

Electronic Parking Brake (EPB):

   - EPB Caliper Open
   - EPB Caliper Closed
   - G-Sensor Calibration

<<< Date 16.01.2022 >>>

For Model P1:

Transmission Control Unit (TCU):

   - DSI
   - Launch Torque - Data Counter Reset
   - Align Vehicle Configuration
   - Active Aero Rear Service Position
   - Active Aero Rear Depressurisation
   - Transmission Valve Cleaning
   - Transmission Replacement Reset
   - Un-pair Immobilizer
   - Dual Clutch Calibration

<<< Date 14.01.2022 >>>

For Model P1:

Transmission Control Unit (TCU):

- Active Aero Rear Bleed

<<< Date 04.01.2022 >>>

For Model P1:

Transmission Control Unit (TCU):

- Active Aero Rear Calibration

<<< Date 14.12.2021 >>>

For Model P1:

Transmission Control Unit (TCU):

- Emergency Wing Lift

Chassis Control Unit (CCU):

- Align Vehicle Configuration