DiagCode Truck Diagnostic Software for Heavy-Duty Vehicles

     Diag Truck Tool is a specialised diagnostic software solution developed by DiagCode, designed for use with trucks, buses, coaches, and other heavy-duty vehicle platforms.

     The software provides access to a wide range of diagnostic functions, system monitoring, and service-related procedures through compatible interfaces, supporting professional workflows in maintenance, repair, and advanced configuration environments.

     The solution is structured in modular packages, each covering selected vehicle platforms, including Mercedes-Benz, DAF, Scania and others, allowing flexible configuration based on workshop requirements.

     Diag Truck Tool is an independently developed software solution and does not represent an official product or service tool of any vehicle manufacturer.

This software is intended for professional use only.
     Function availability may vary depending on vehicle model, control unit type, software version, and regional regulations.

 The software will contain different packages for different brands, models and functionalities.

* Some functions may be restricted or regulated depending on local laws and regulations. The user is responsible for compliance with applicable legislation. Function availability may vary depending on vehicle model, software version, and regional regulations. All configurations must be performed in compliance with applicable laws and manufacturer specifications.

Package 1 – Mercedes-Benz Vehicle Coverage Includes:

 

 Emission System Configuration (ACM02T) - Actros MP4, Atego, Amor, Antos, Econic, Arocs , Econic2, Unimog, Agri and industrial equipment for engine OM470/471/473 (2012-2016)

 Emission System Configuration (ACM21T) - Actros MP4, Atego, Amor, Antos, Econic, Arocs , Econic2, Unimog, Agri and industrial equipment for engine OM470/471/473(2016-2021)

 Emission System Configuration (ACM301T) - Actros MP4, Atego, Amor, Antos, Econic, Arocs , Econic2, Unimog, Agri and industrial equipment for engine OM470/471/473(2016-2021)

 Emission-Related Fault Code Management (ACM02T, ACM21T, ACM301T) - Actros MP4, Atego, Amor, Antos, Econic, Arocs , Econic2, Unimog, Agri and industrial equipment for engine OM470/471/473(2012-2018)

 Emission-Related Fault Code Management (MCM02T) - Actros MP4, Atego, Amor, Antos, Econic, Arocs , Econic2, Unimog, Agri and industrial equipment for engine OM470/471/473(2012-2018)

 Speed Limitation Parameter Adjustment (CPC301T) - Actros MP4, Atego, Amor, Antos, Econic, Arocs , Econic2, Unimog(2012-2018)*Please know that raising speed limiter is forbidden in a lot of countries and for vehicles that are homologated with eg90 tachograph. Also you have to check the speed index on tyres. 

 Fault Code Reading and Clearing (DTC Management) - Read and Clear DTCs in ACM02T, ACM21T, ACM301T, CGW01T, CPC301T, CPC501T, MCM02T, MCM21T

 Vehicle Configuration Functions (Language and Seatbelt Warning Settings) (ICC501T) - Actros MP5,  Atego, Axor 2018-2022 Euro6

 Speed Limitation Parameter Adjustment (CPC501T) - Actros MP5,  Atego, Axor 2018-2024 euro6 *Please know that raising speed limiter is forbidden in a lot of countries and for vehicles that are homologated with eg90 tachograph. Also you have to check the speed index on tyres. 

 EEPROM and Flash Data Read/Write Functions (CPC301T)

 EEPROM and Flash Data Read/Write Functions (EBS02)
 EEPROM and Flash Data Read/Write Functions (TCM01T)

 Flash Data Read/Write Functions (CPC4)

 EEPROM Data Read/Write Functions (ACM02T)

 Engine Torque Parameter Adjustment (MCM21T)

PRICE for Package 1 - Mercedes -> 1950 euro** - only the software*

 

*Security dongle - 50 euro (Buy once. Used for all current and future activations. If you already have a dongle with Simplediag you can use that too)

** Final price - no time limit, subscriptions or hidden fees

Package 2 – DAF Vehicle Coverage Includes:

 

 Speed Limitation Parameter Adjustment (EBS4) – DAF Euro 6 vehicles with EBS4 systems

PRICE for Package 2 - DAF -> 500** euro - only the software*

 

*Security dongle - 50 euro (Buy once. Used for all current and future activations. If you already have a dongle with Simplediag you can use that too)

 

** Final price - no time limit, subscriptions or hidden fees

Package 3 – Scania Vehicle Coverage Includes:

 

 COO7 – Parameter Configuration and Data Read/Write Functions; Flash Data Read/Write

 EMD1 – Module Reset and Flash Data Read/Write; Flash Integrity Correction (CRC)

 EMS S6 – Parameter Configuration; Flash Data Read/Write; Flash Integrity Correction (CRC)

 EMS S8 – Module Reset and Flash Data Read/Write; Flash Integrity Correction (CRC)

 OPC5 – Flash Data Read/Write; Flash Integrity Correction (CRC)

 TMS1 – Flash Data Read/Write; Flash Integrity Correction (CRC)

 PIN Code Calculation from Encryption Data

 

Function availability may vary depending on control unit type, software version, and regional regulations.
All operations must be performed in compliance with applicable laws and manufacturer specifications.

  • Coo7.png
  • Coo006_coordinator key calc fro dump.png
  • EMD1.png
  • EMS_S6.png
  • EMS_S8.png
  • from enc code.png
  • OPC5.png
  • TMS1.png

PRICE for Package 3 - SCANIA -> 500 euro** - only the software*

Annual subscription -> 120 euro

*Security dongle - 50 euro (Buy once. Used for all current and future activations. If you already have a dongle with Simplediag you can use that too)

** This price includes a subscription valid for 365 days from the date of purchase. A subsequent subscription fee is payable after the first year has expired.

All prices are exclusive of VAT and delivery charges

DISCLAIMER: All vehicle manufacturer names, including but not limited to Mercedes-Benz, DAF, Scania and others, are trademarks of their respective owners.
DiagCode Ltd is an independent developer of specialised diagnostic software and is not affiliated with, authorised by, or endorsed by any of these manufacturers.
All references are used strictly for identification and compatibility purposes only.